It is always a good idea to clean and disinfect the water dispenser thoroughly every time when you change the water bottle during the house cleaning process. You should always unplug the water dispenser before you clean it. Follow few tips and tricks by house cleaning highlands ranch to clean the water dispensers.

What should you do before you clean the water dispenser?

Before you start cleaning the water dispenser, you will need to first create the disinfecting solution. Whenever you create the solution during the house cleaning make sure that you wear the safety items during the house cleaning.

- Safety glasses

- Gloves

- Waterproof apron

To make a disinfecting solution during the house cleaning process you need to mix the following items together.

- 15 ml of unscented bleach

-  5L of water

If you are planning to use the chemical product to clean the water dispenser make sure it is:

- Approved to be used on the food contact surfaces.

- Use at the right concentration and having the right retention time. For this you must go through the manufacturer’s manual.

- Store it properly

- Once you are done flush it properly.

How to clean the cold water dispenser?

During the house cleaning process, the easiest way to clean your water dispenser is when you change the water bottle. The first thing you need to do is unplug the water dispenser. After that you need to remove the water bottle and drain the remaining water through the peg. Then you need to remove the no spill guard but make sure that you don’t break the parts. Lastly, when house cleaning you can clean all of the parts in the dishwasher

After this you need to fill the water dispenser with the cleaning solution and use long brush to clean it completely. Drain some of the chemical liquid through the plug and let the solution sit for 5 minutes at least. If you keep it longer it will create corrosion. Drain the cleaning solution from the reservoir by using the plugs in the bucket and then flush the solution in the toilet. Again fill the water dispenser completely to remove the bleach properly and throw the water in toilet. Then put the baffle and the no spill guard back again. Add the new bottle and plug the water dispenser again!

What else can you do to maintain your water dispenser?

During the house cleaning process, make sure that your clean your water dispenser on the regular basis, so, that it keeps working in proper condition.

- Every month you should check the wire grid across the back area of the water dispenser so that you can remove the dirt and grime that is stuck.

- Make sure that you don’t lubricate the water dispenser.

- Lastly, when the water dispenser is out of water unplug the wire.

If you are occupied with office work and you don’t have enough time for house organization then call your local house cleaning Highlands ranch experts.